All Categories
Rogers PCB

High Frequency Electronic Circuit Board


Minimum Line Width : 3MIL ;

Minimum Line Spacing : 3MIL ;

Drilling Diameter : ≥ 0.1mm ;

Processing Size : 600 * 1200mm 

Plate Thickness : 0.1-10mm ;

Processing Layers : 2-36 layers;

Special Process : Thick gold plate, ultra thick plate, depth control drilling, back drilling, hole filling electroplating, copper slurry plug hole, mechanical blind hole, etc.

Surface Treatment Processes : Include OSP, gold precipitation, silver precipitation, tin precipitation, gold plating, pure gold plating, thick gold plating, nickel palladium gold plating, nickel plating, tin plating, tin spraying, etc.

INQUIRY

High Frequency PCB

The Concept of High Frequency PCB and Its Unique Ccharacteristics.

High frequency PCB refers to a special type of circuit board with high electromagnetic frequency, used in the fields of high frequency (frequency greater than 300MHz or wavelength less than 1 meter) and microwave (frequency greater than 3GHz or wavelength less than 0.1 meter). It is a circuit board produced on a microwave substrate copper clad board using some processes of ordinary rigid circuit board manufacturing methods or special processing methods.

High frequency PCB boards are characterized by their excellent transmission performance in high-frequency operating environments. At the same time, the board thickness of high-frequency boards is thinner, and the line width and line spacing are finer than those of ordinary PCB circuit boards. In addition, the dielectric constant of high-frequency boards is particularly small, so it can reduce signal loss and improve signal transmission rate and reception sensitivity. High-frequency PCB boards generally use materials such as RO4350B, RO4003C and F4B.

A. What are The Materials Used For Making High Frequency PCB?

The performance of high-frequency boards in wireless or other high-frequency environments depends on building materials. For many applications, the use of laminated FR4 materials can improve dielectric properties. When manufacturing high-frequency PCBs, commonly used boards include Rogers, Teconic, Isola, F4B (Teflon), TP-2, FR4, Panasonic, and Taiyao.

B. The DF Level of General Materials Directly Determines the Performance of PCB:

a, DK (dielectric constant of DK material, indicating its ability to store charges) should be small and stable enough, usually as small as possible, as high DK may cause signal transmission delay.

b, DF (DF is the loss angle of the material, and when signals are transmitted in the material, they do not completely propagate forward along the signal path, and some of them flow through the material into nearby conductors.) should be very small, which mainly affects the quality of signal transmission. A smaller DF can correspondingly reduce signal loss.

c, The coefficient of thermal expansion should be as same as copper foil as much as possible, as the difference can cause the copper foil to separate during cold and hot changes.

d, In humid environments, water absorption must be low, while high water absorption can affect DK and DF.

e, Heat resistance, chemical resistance, impact resistance, and peel resistance must be good.

The thermal expansion coefficient of high-frequency circuit boards needs to be as same as copper foil as much as possible, as high-frequency circuit boards may cause copper foil separation under alternating cold and hot conditions. To ensure the perfect performance of high-frequency circuit boards, it is necessary to be as same as copper foil as much as possible. High frequency PCBs have the characteristics of heat resistance, chemical corrosion resistance, impact resistance, and good peel resistance.

C. What are The Advantages of High Frequency PCB Being so Popular?

a, High Efficiency
Generally speaking, the consumption loss of high-frequency circuit boards is attributed to their small dielectric constant, which comes from the performance of the materials they use, so their consumption is naturally smaller than other circuit boards. Under such excellent congenital conditions, the induction heating technology at the forefront of technological development can also meet the demand for target heating, making the efficiency of high-frequency circuit boards very high. Of course, while pursuing efficiency, environmental protection cannot be abandoned.

b, Fast Working Speed
As is well known, the transmission speed is directly proportional to the dielectric constant. In terms of electrical principles, the transmission speed is inversely proportional to the square root of the dielectric constant, that is, the larger the dielectric constant, the slower the transmission speed; The smaller the dielectric constant, the faster the transmission speed. This is also one of the reasons why PCB high-frequency boards are popular among people. It uses special materials to ensure the characteristics of small dielectric constant, while also ensuring transmission speed and relatively stable operation of the circuit board.

c, Adaptability
It is widely used in high-frequency circuit boards in various industries that require heating treatment of precision metal materials. In its technical field, it can not only achieve heating of components at different depths, but also focus heating on local characteristics. Whether it is surface or depth, centralized or dispersed heating methods can be easily completed.

d, Strong Tolerance and Ability to Withstand Interference
The environment affects the composition of the medium, so high-frequency circuit boards still have some environmental requirements, especially in the south where the weather is more humid. High frequency circuit boards can adapt well to such environments. High frequency circuit boards made of materials with extremely low water absorption can challenge such environments. At the same time, it is best to make the PCB circuit board have the advantage of chemical corrosion resistance, so that it can withstand humidity and high temperature in humid environments, and have great peel strength.

Shenzhen Xinchenger Electronics Co., Ltd. is a strong manufacturer mainly engaged in fast sampling and small to medium-sized batch production of 2-36 layer high-frequency microwave RF induction printed circuit boards. Professional production of high-frequency, high-precision, high-density environmentally friendly PCB circuit boards. The main products include: high-frequency PCB circuit boards, Rogers high frequency boards, Teconic high-frequency boards, F4B/Teflon high frequency boards, microwave RF boards, special circuit boards, etc. We are a high-quality high frequency PCB manufacturer with strong capabilities. If you need it, please feel free to inquire.


Inquiry

Leave a Message

Hot categories