EN 
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
CA
TL
IW
ID
LV
Rogers High Frequency Board
Minimum Line Width : 3MIL ;
Minimum Line Spacing : 3MIL ;
Drilling Diameter : ≥ 0.1mm ;
Surface Technology : Gold deposition, Gold plating, Tin spraying, OSP ;
Processing Size : 600 * 1200mm ;
Plate Thickness : 0.1-10mm ;
Processing Layers : 2-36 layers.
Special Process : Thick gold plate, ultra thick plate, depth control drilling, back drilling, hole filling electroplating, copper slurry plug hole, mechanical blind hole, etc.
Surface Treatment Processes : Include OSP, gold precipitation, silver precipitation, tin precipitation, gold plating, pure gold plating, thick gold plating, nickel palladium gold plating, nickel plating, tin plating, tin spraying, etc.
Shenzhen Xinchenger Electronics Co., Ltd. is a one-stop solution strength factory for high-reliability PCBs and PCBAs, with rich experience from single-sided to complex multi-layer printed circuit boards and top-level assemblies (PCBA).
We have a wide range of domestic and imported HF plates: Rogers, Taconic, Isola, F4B (Teflon), TP-2, FR4, etc. with dielectric constants ranging from 2.2-10.6. We can provide 24 hours fast sample service in time to win business opportunities for our customers. Meanwhile, our company has more than ten years of strong production experience, skillful craftsmanship, engineering technology and excellent service. We have the advantages of high quality, low cost and foreign information technology support.Long-term supply of high frequency PCB circuit boards, Rogers PCB high frequency, Taconic PCB high frequency, F4B/Teflon PCB high frequency, microwave RF boards, special circuit boards and so on. HF circuit boards, PCB high frequency boards, Suitable for data communication high frequency PCB.
The RT/Duroid 5880 Rogers high frequency PCB is made of polytetrafluoroethylene glass fiber reinforced material. High frequency circuit design has always had strict requirements for the dielectric constant of printed circuit board. The dielectric constant of RT/duroid5880 measured at a working frequency of 10GHz is only 2.2, which is significantly lower than that of similar materials in the current market. Therefore, from the perspective of performance parameters and production costs, this board is more suitable for high-frequency design applications compared to similar products. At the same time, the dielectric loss of the board is measured under the same standard, only 0.0009. The extremely low dielectric loss makes it very suitable for high-frequency and broadband design applications that require minimal dispersion and loss. It mainly uses hand to hand digital radio antennas, microstrip and stripline circuits, millimeter wave applications, missile guidance systems, military radar systems, and high-frequency circuit board for commercial aviation telephones.
Characteristics of RT/Duroid 5880 High Frequency PCB：
a, Extremely low dielectric constant, measured at 10GHz, with a dielectric constant of 220+0.02:
b, Measured at extremely low dielectric loss of 10GHz, the dielectric loss factor is 0.0009.
