All Categories
About PCB

About PCB

Home > News > About PCB

Rogers TC350 and TC600 High Frequency Circuit Board Specification Parameters

Hits : 6

Rogers TC350 and TC600 high frequency circuit boards are TC series PTFE materials containing glass fiber reinforcement and high thermal conductivity ceramic fillers, which can provide better PCB thermal management for applications requiring high-power RF signals. The material's low loss, high thermal conductivity, low coefficient of thermal expansion, and excellent temperature phase stability provide excellent performance and reliability in high power applications.

Rogers' TC series materials are well suited for applications that are sensitive to changes in dielectric constant (Dk) with temperature, including power amplifiers, filters, couplers, combiners, power dividers, etc.

Rogers TC350 and TC600 high frequency circuit boards offer designers a unique combination of low insertion loss and higher thermal conductivity. This allows the product in high power applications to have outstanding reliability and reduce circuit operating temperature and improve equipment reliability. TC600 high dielectric constant with the best in class thermal conductivity and mechanical properties, very suitable for power amplifier designers to better realize the reduction of PCB finished size to reduce the cost of PCB caused.

Rogers TC350 and TC600 two material differences:

A. Rogers TC350 dielectric constant Dk: 3.50 + / - 0.04; loss factor Df: 0.002 (at 10 GHz); thermal expansion XYZ axis coefficient: 7/7/23 (ppm / ℃); thermal conductivity: 0.72W / m - K; fire rating: UL 94V-0

B. Rogers TC600 dielectric constant Dk: 6.15 +/-0.15; loss factor Df: 0.002 (at 10 GHz); thermal expansion XYZ-axis coefficient: 9/9/35 (ppm / ℃); thermal conductivity: 1.0W/m-K; fire rating: UL 94V-0

Rogers TC350, TC600 has the following characteristics.

PCB-4

Advantages:

A. Reduce transmission line loss and heat generation.

B. Improve the bandwidth utilization and efficiency of amplifiers and antennas.

C. CTE can be matched to low-voltage soldered active components.

D. Improved reliability of active element and plated via connections.

Typical applications:

A. Filters, couplers.

B. Combiner, power divider.

C. High power RF and microwave power amplifiers.

Shenzhen Xinchenger Electronics Co., Ltd. is a professional 2-36 layers high frequency PCB circuit board manufacturer, can expedite the production of PCB boards, high frequency boards, special circuit boards, microwave RF boards, antenna boards and other products, standing Rogers, TACONIC, F4B, TP-2, FR-4 and other boards, with dielectric constants ranging from 2.2 to 10.6. You can contact us if you have any demand.


Leave a Message

Hot categories